Har du som kund frågor eller funderingar så svarar vi enklast på mail via info@grevensmcdelar.com. Vi svarar snarast!

Knappsatser Aprilia

Specifikationer 2 vägs

Start / Kill 2 button handlebar race switches for Aprilia RSV4 – all models 

This switch is a direct replacement for the standard Start / Kill switch assembly found on the RSV4 , all models 

This aluminium assembly has been designed ultra-slim and encompasses a red latching switch for RUN/STOP and a black momentary switch for the starter motor. 

No modification of the bike wiring is necessary, this kit plugs directly into the 4 way connector of the standard loom. 

Specifikationer 3 vägs

Aprilia RSV4 3 way left switch Mode / Set 

Handlebar race switch 

This 3 button switch is designed for use on race/track bikes where the lights, turn signals, horn function are not needed. 

The aluminium assembly has been ergonomically designed for easy use and encompasses 3 momentary switches as described below. 

No modification of the bike wiring is necessary, this kit plugs directly into the connectors of the standard loom. 

Specifikationer 5 vägs

Five button handlebar race switches for - Aprilia RSV4 

This switch is a direct replacement for the standard left hand switch assemblies found on the RSV4 replacing both the large plastic housing and the flipper switch assembly. 

The set is specifically designed for track use where the turn signals, horn and lights controls are not needed. 

No modification of the bike wiring is necessary as this plugs directly into the 9 way and 8 way wiring loom connectors. 

Knappsatser
2.149,00 kr
  • subtitles Produktbeskrivning

    Specifikationer 2 vägs

    Start / Kill 2 button handlebar race switches for Aprilia RSV4 – all models 

    This switch is a direct replacement for the standard Start / Kill switch assembly found on the RSV4 , all models 

    This aluminium assembly has been designed ultra-slim and encompasses a red latching switch for RUN/STOP and a black momentary switch for the starter motor. 

    No modification of the bike wiring is necessary, this kit plugs directly into the 4 way connector of the standard loom. 

    Specifikationer 3 vägs

    Aprilia RSV4 3 way left switch Mode / Set 

    Handlebar race switch 

    This 3 button switch is designed for use on race/track bikes where the lights, turn signals, horn function are not needed. 

    The aluminium assembly has been ergonomically designed for easy use and encompasses 3 momentary switches as described below. 

    No modification of the bike wiring is necessary, this kit plugs directly into the connectors of the standard loom. 

    Specifikationer 5 vägs

    Five button handlebar race switches for - Aprilia RSV4 

    This switch is a direct replacement for the standard left hand switch assemblies found on the RSV4 replacing both the large plastic housing and the flipper switch assembly. 

    The set is specifically designed for track use where the turn signals, horn and lights controls are not needed. 

    No modification of the bike wiring is necessary as this plugs directly into the 9 way and 8 way wiring loom connectors.